طاولة عمل لتفاصيل المسامير واللحام وفق AISC 360-16 الفصل J: أبعاد الثقوب القياسية والموسّعة والمشقوقة (جدول J3.3)، والحد الأدنى والأقصى للمسافات الحرفية والتباعد (J3.3 و J3.4 و J3.5)، وقص وشد المسمار (جدول J3.2)، والتحميل والتمزّق (J3.10)، وشدّ التثبيت المسبق (جدول J3.1)، والوصلات الحرجة للانزلاق (J3.8)، واللحام الزاوي: الحد الأدنى والأقصى لحجم الساق، والعنق الفعّال، والمقاومة لكل بوصة مع زيادة زاوية التحميل (J2.4).
كل قيمة معروضة بحالتَي LRFD و ASD، مع رسم مقياسي للثقوب والمسافات ومقطع اللحام.
A detailing bench for bolts and fillet welds to AISC 360-16 Chapter J: nominal hole dimensions for standard, oversized and slotted holes (Table J3.3); minimum and maximum edge distance and spacing (J3.3, J3.4, J3.5); bolt shear and tension (Table J3.2); bearing and tearout (J3.10); minimum pretension (Table J3.1); slip-critical joints (J3.8); and fillet welds — minimum and maximum leg size, effective throat, and strength per inch including the load-angle increase (J2.4).
Every value is shown in both LRFD and ASD, with a scaled drawing of the hole pattern, edge distances and the weld section.